View Poll Results: Vote Now for November 2016 QOTM!!

Voters
27. You may not vote on this poll
  • jwraymond6

    10 37.04%
  • thesmith87250r

    3 11.11%
  • FerrinMotorsports

    7 25.93%
  • 250rmanpuma

    3 11.11%
  • bcm

    3 11.11%
  • jto1

    1 3.70%
Results 1 to 9 of 9

Thread: Vote Now for November 2016 QOTM!!

  1. #1
    Administrator havinnoj's Avatar
    Join Date
    Jul 2013
    Location
    Portland, OR / West Palm Beach, FL
    Posts
    1,428
    Post Thanks / Like
    Mentioned
    20 Post(s)
    Feedback Score
    2 (100%)

    Vote Now for November 2016 QOTM!!

    Anything goes this month!

  2. #2
    Racer jwraymond6's Avatar
    Join Date
    Jan 2015
    Location
    Non your business
    Posts
    353
    Post Thanks / Like
    Mentioned
    3 Post(s)
    Feedback Score
    0
    Chassis | Suspension | Controls:
    Frame: 99 Lsr pro peg
    A Arms: Lsr +3+1
    Swingarm: stock 88 polished
    Steering Stem: Lsr +2+1
    Axle: Lsr
    Carrier: Lsr
    Locknut: stock
    Hubs F|R: Lsr/Lsr
    Bars: tusk fat bar
    Brake/Clutch Lever: asv
    Grips: odi
    Foot Pegs: Ac pro peg nerf
    Bumper: none
    Grab Bar: unknown
    Front Shocks: Elka stage 4
    Rear Shock: stock
    Brake Lines: streamline/stock
    Rotors F|R: stock
    Rims F|R: Unknown/itp
    Tires F|R: unknown

    Body:
    Plastic: maier
    Graphics|Seat Cover: ddr slap/ fourwerx
    Fuel Tank:

    Engine|Drive System:
    Cylinder|Head: esr
    Bore & Stroke: 72/66
    Displacement: 310
    Carburetor: 38 a/s
    Reeds: vforce 3
    Air Filter|Box: esr
    Pipe|Silencer:esr trx6
    Clutch|Plates: stock
    Gearing F|R: 13/40
    CDI|Killswitch: 2000 cr250
    Cooling: stock

    Other:

    image.jpg
    image.jpg
    image.jpg
    99 Lsr TRX310R
    87 250r currently getting a 363 sphynx built by Pete @ hybrid engineering

  3. #3
    Racer jwraymond6's Avatar
    Join Date
    Jan 2015
    Location
    Non your business
    Posts
    353
    Post Thanks / Like
    Mentioned
    3 Post(s)
    Feedback Score
    0
    where them Rs at
    99 Lsr TRX310R
    87 250r currently getting a 363 sphynx built by Pete @ hybrid engineering

  4. #4
    Pro-X
    Join Date
    Jan 2014
    Posts
    591
    Post Thanks / Like
    Mentioned
    1 Post(s)
    Feedback Score
    3 (100%)
    Chassis/suspension/controls
    FRAME oem 88
    A arms lonestar +2 +1
    Steering stem lonestar +2
    Lonestar carrier
    Lonestar anti fade
    Swing arm lonestar triple chrome
    Axle dura blue +2
    Hubs stock
    Front shocks works triple rate
    Rear shock pep 5/8 shaft
    Streamline brake line front and rear
    Foot pegs big thanks to trxjeeper!
    Tires hole shot
    Duncan bumper
    Pro taper bars

    Body

    Plastic maier white
    Graphics seat cover one industry

    Engine
    Stock cylinder 68mm bore
    210 psi 50/50 fuel mix
    Displacment 265
    Carb 38mm air striker
    Reeds boysen
    Cool head
    ct pipe and fmf silencer
    some updates since this pic . elka shocks , pt 2003 race pipe with fat boy silencer , new top end 68.5 piston , right side inner case








  5. #5
    Racer jwraymond6's Avatar
    Join Date
    Jan 2015
    Location
    Non your business
    Posts
    353
    Post Thanks / Like
    Mentioned
    3 Post(s)
    Feedback Score
    0
    Bump
    99 Lsr TRX310R
    87 250r currently getting a 363 sphynx built by Pete @ hybrid engineering

  6. #6
    Racer
    Join Date
    Jul 2013
    Location
    Paso Robles California
    Posts
    225
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Feedback Score
    1 (100%)
    Chassis | Suspension | Controls:
    Frame: Custom JP with Walsh aluminum subframe.
    A Arms: Laeger T-pin
    Swingarm: No-Link
    Steering Stem:Laeger T-pin with swivels
    Axle:LSR +4
    Carrier:LSR Billet
    Locknut:Billet ASR
    Hubs F|R:Billet RPM fronts...Billet LSR rear
    Bars:Fasst Flexx Custom powdercoated
    Brake/Clutch Lever:ASV levers with Magura hydraulic clutch
    Grips:Custom billet/rubber
    Foot Pegs:Pro peg
    Bumper:RIS designs
    Grab Bar:AC
    Front Shocks:MOTOWOZ
    Rear Shock:custom no link
    Brake Lines:Stainless
    Rotors F|R:Custom
    Rims F|R:Beadlock 10x5fronts Beadlock 10x10 rears
    Tires F|R:American Racer

    Body:
    Plastic:Maier
    Graphics|Seat Cover:Custom ESR graphics QuadTech seat cover
    Fuel Tankem with Chrome QuadTech cover

    Engine|Drive System:
    Cylinder|Head:ESR 330
    Bore & Stroke:
    Displacement:330
    Carburetor:41.5 kehein
    Reeds:ESR
    Air Filter|Box:ESR air box delete
    Pipe|Silencer:ESR TRX11 centermount
    Clutch|Platesem with billet clutch basket
    Gearing F|R:varies
    CDI|Killswitchem ignition with RPM advancer and lightened flywheel Pro design kil switch
    Cooling:Walsh radiator with custom Walsh Aluminum shrouds
    IMAG0819.jpgIMAG0825.jpgIMAG0824.jpgIMAG0823.jpgVentura Raceway 91716.jpg
    Last edited by FerrinMotorsports; 10-16-2016 at 03:04 AM.

  7. #7
    Rider
    Join Date
    Jul 2015
    Location
    Lake Stevens, Wa
    Posts
    44
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Feedback Score
    0

    86 r

    Chassis | Suspension | Controls:
    Frame: Stock
    A Arms: Full Flight +2 +1
    Swingarm: +2 Laegers
    Steering Stem: Stock
    Axle: Durablue +4
    Carrier: Lonestar
    Locknut: RAD
    Hubs F|R: 400ex front, 250r rear
    Bars: Fatbar
    Brake/Clutch Lever: ASV
    Grips: ODI
    Foot Pegs: Unhinged
    Bumper: trx450r Alba
    Grab Bar: Unhinged trx250r
    Front Shocks: Elka stage 3
    Rear Shock: Elka stage 3
    Brake Lines: American
    Rotors F|R: 400ex
    Rims F|R: Alba Beadlocks
    Tires F|R: Hooiser 150 MX

    Body:
    Plastic: Full Bore
    Graphics|Seat Cover: Stock
    Fuel Tank: Stock

    Engine|Drive System:
    Cylinder|Head: Stock
    Bore & Stroke: .20 over & Stock
    Displacement: 260cc
    Carburetor: TM 42mm Mikuni
    Reeds: V-Force Delta 3
    Air Filter|Box: Open K & N
    Pipe|Silencer: ESR ESR9 CM
    Clutch|Plates: Hinson Plates & Fibers
    Gearing F|R: 14F 39R
    CDI|Killswitch: Stock
    Cooling: Stock

    Other:
    R6 Tailight

    20160910_110642 (2).jpg20160910_110704.jpg20160910_110654.jpg20160910_110723.jpg20160910_110714.jpg
    Attached Images Attached Images

  8. #8
    Rider
    Join Date
    Jun 2016
    Location
    Rocklin California
    Posts
    88
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Feedback Score
    0
    Chassis | Suspension | Controls:
    Frame: stock
    A Arms: stock
    Swing arm: +6 fireball racing
    Steering Stem: stock
    Axle: stock
    Carrier: stock
    Locknut: stock
    Hubs F|R: stock
    Bars: tag
    Brake/Clutch Lever: no brake,
    Grips: tag
    Foot Pegs: stock
    Bumper: no bumper
    Grab Bar: no grab bar
    Front Shocks: stock
    Rear Shock: stock
    Brake Lines: rear only
    Rotors F|R: rear only
    Rims F|R: Douglas blue
    Tires F|R: skat trak triple buff

    Body:
    Plastic: drag cut
    Graphics|Seat Cover:
    Fuel Tank: stock

    Engine|Drive System:
    Cylinder|Head: esr 330
    Bore & Stroke: 4 mil stoker
    Displacement:
    Carburetor: keihin from esr
    Reeds: esr
    Air Filter|Box: esr air box eliminator kit
    Pipe|Silencer: esr trx-11 pipe and inframe silencer
    Clutch|Plates: drag cut
    Gearing F|R: 14-36
    CDI|Kill-switch: kill switch
    Cooling: stock

    Other:

    IMG_1779.JPGIMG_1714.JPG

  9. #9
    Rider jto1's Avatar
    Join Date
    Nov 2015
    Location
    illinois
    Posts
    80
    Post Thanks / Like
    Mentioned
    1 Post(s)
    Feedback Score
    0
    Chassis | Suspension | Controls:
    Frame: stock 86
    A Arms: stock 86
    Swingarm: stock 86
    Steering Stem: stock 86
    Axle: rpm
    Carrier: rpm
    Locknut: rpm
    Hubs F|R: stock 86
    Bars: renthal
    Brake/Clutch Lever: stock 86
    Grips: scott
    Foot Pegs: alba pro peg
    Bumper: alba 450r
    Grab Bar: armadillo drop
    Front Shocks: 450r reworked to 250r specs
    Rear Shock: stock 86 pep conversion
    Brake Lines: ss
    Rotors F|R: stock replacement
    Rims F|R: itp and stock goldies
    Tires F|R: itp xc 21x7x10/20x11x9

    Body:
    Plastic: maier race cut
    Graphics|Seat Cover: custom made ddr slapp/ factor fx seat cover
    Fuel Tank: stock 86

    Engine|Drive System:
    Cylinder|Head: stock 86 bhp ported /stock reworked for 110 by bhp
    Bore & Stroke: 72mmx72mm
    Displacement:295
    Carburetor: kenhin 38mm pwk a/s
    Reeds: vf2
    Air Filter|Box: k&n outer wears and outer wears lid stock box & snorkel
    Pipe|Silencer: esr trx6 & esr silencer
    Clutch|Plates: Barnett basket and components/ 89 update/ cliegh mod
    Gearing F|R: renthall 14/39
    CDI|Killswitch: dynatek adjustable 2001 cr250r set on curve #2/ 2001 cr kill switch
    Cooling: Api 3 core oversize

    Other: 2001 cr250r ignition/ complete rebuild all body and engine bearings and bushings using oe components
    Built to be a sleeper and look like a stock/lightly modded quad. Built from a frame, and a junk motor and cases, and peiced together from ebay and trx owners for life. A full resurrection from the dead and parted.
    20161022_165209.jpg
    [ATTACH=CONFIG]20161022_180138.jpg12119[/ATTACH]
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •