Results 1 to 2 of 2

Thread: Swingarm Fixture

  1. #1
    Racer ytman's Avatar
    Join Date
    Jul 2013
    Location
    Palmdale,Ca
    Posts
    278
    Post Thanks / Like
    Mentioned
    5 Post(s)
    Feedback Score
    0

    Swingarm Fixture

    I had to make a fixture so I can fix a swingarm I tried to modify. I thought I could just cut the center out of a 88/89 and make a 86/87. Unfortunately there were complications. I used a stock 89 arm to get the dimensions right.safix1.jpgsafix2.jpgsafix3.jpgsafix4.jpgsafix5.jpg

  2. #2
    Racer ytman's Avatar
    Join Date
    Jul 2013
    Location
    Palmdale,Ca
    Posts
    278
    Post Thanks / Like
    Mentioned
    5 Post(s)
    Feedback Score
    0
    Just a 1/2" thick disc of aluminum on each side of the swinger that my dad turned on his little lathe to put a lip on to locate. same on the front.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •